Carol

Unit

Carcase

In 18 mm thick environment-friendly water-repellent (swelling after 24 hours 10% max) wooden particle board panels with low formaldehyde content (class F**** under JIS A 1460 Japanese standard), covered on both sides with mat melamine finish. Front edge in ABS (1 mm thick) and laminate edging (0.3 mm thick) on the remaining sides.

Shelves

In 18 mm thick wooden particle board panels with low formaldehyde content (class E1), covered on both sides, with mat melamine finish. Front edge in ABS (1 mm thick) and laminate edging (0.3 mm thick) on the remaining sides.

Glass shelves

6 mm thick tempered glass slab (8 mm for 120 cm units) with polished, bevelled edges.

Back panel

Fibreboard panel 3 mm thick, decor-printed water-based varnish finish.

Colour

Aurora Cherry melamine with back panel and shelves in customised colour (Cream with decoration).

Front panels

Framed door

Frame in semi-mat varnished solid Cherry, 21 mm thick.
Inner panel in water-repellent wooden particle board with low formaldehyde content (class E1), finished with semi-mat varnished Cherry veneer

Plain door

Water-repellent wooden particle board panel, 20 mm thick, with low formaldehyde content (class E1), finished with semi-mat varnished Cherry veneer.

SLAT DOOR

Water-repellent wooden particle board panel, 20 mm thick, with low formaldehyde content (class E1), finished with semi-mat varnished Cherry veneer.

PLAIN lacquered door

Fibreboard (Medium Density) panel 19 mm thick, with low formaldehyde content (class E1), with melamine surface, edges with polyester primer, gloss, mat or metallic lacquered, available in various colours.

LACQUERED SLAT DOOR

Fibreboard (Medium Density) panel 19 mm thick, with low formaldehyde content (class E1), with melamine surface, edges with polyester primer, gloss, mat or metallic lacquered, available in various colours.

LAMINATE DOOR WITH ABS EDGE

Water-repellent wooden particle board panels 19 mm thick with low formaldehyde content (class E1) covered with mat or gloss laminate  available in various colours, with 1.5 mm thick ABS edging in the same colour as the laminate.

LAMINATE DOOR WITH ALUMINIUM EDGE

Water-repellent wooden particle board panels 19 mm thick with low formaldehyde content (class E1) covered with mat or gloss laminate available in various colours, with 1 mm thick aluminium edging.

Ribbed door

Fibreboard (Medium Density) 20 mm thick, with low formaldehyde content (class E1), Aluminium Grey mat lacquered

Framed door with glass

Glass door with frame in Steel-finish Aluminium or solid Cherry with semi-mat varnish finish.

STEEL DOOR

AISI 304 18/10 stainless steel, scotch brite finish, with extruded polystyrene internal filling.

Glass for door

Door with frame in solid Cherry and master-carrè glass:
Tempered, master-carrè decorated sheet glass, 4 mm thick.
Door with frame in solid Cherry and semi-transparent glass:
Bronze finish, tempered and screen-printed sheet glass, thickness 4 mm.
Door with frame in Steel-finish Aluminium:
Tempered, screen-printed (also non-transparent) sheet glass, 4 mm thick.

Varnishing Components

Doors with parts in Cherry
- polyurethane primer with outstanding resistance to light;
- mat polyurethane top coat with outstanding resistance to light.
Mat lacquered plain doors:
- water-based primer
- mat water-based top coat with embossed finish, outstanding resistance to light
 Glossy lacquered plain doors:
- coloured polyurethane primer
- clear gloss
- brushing on front
- front gloss finish, with outstanding resistance to light
Metallic gloss lacquered doors:
- polyurethane primer containing coloured metal particles
- clear gloss
- brushing on front
- front gloss finish, with outstanding resistance to light
Mat lacquered slat doors:
- mat embossed polyurethane finish with outstanding resistance to light
Gloss lacquered slat doors:
- gloss polyurethane finish with outstanding resistance to light.

Drawers and baskets

DRAWERS d. 50 cm

Aluminium sides; Grey melamine bottom panel, 16 mm thick; Grey painted metal back panel.
On fully pull-out galvanised metal runners, calibrated to withstand high dynamic loads (50 Kg). Drawer front vertical and horizontal position can be adjusted.
Blumotion closure system for drawers with handle; version with handle code 29301 and push-pull knob is fitted with Blumotion system; version with handle code 29301 and Tip-on mechanism is fitted with Blumotion system on the top drawer and with Tip-on mechanism on the others.

PULL-OUT DRAWERSd. 50 cm

Aluminium sides and side rails; Grey melamine bottom panel, 16 mm thick; Grey painted metal back panel.
On fully pull-out galvanised metal runners, calibrated to withstand high dynamic loads (50 Kg). Basket front vertical and horizontal position can be adjusted.
Blumotion closure system for baskets with handle;  version with handle code 29301 and push-pull knob is fitted with Blumotion system;  version with handle code 29301 and Tip-on mechanism is fitted with Blumotion system on the top drawer and with Tip-on mechanism on the others.
Pull-out baskets depth 45 cm for sink base units.

Accessories

Plinth

In Aluminium coated PVC 98 or 148 mm high, with satined steel finish and plastic bottom trim.
In “fine ribbed" Aluminium 98 or 148 mm high, with plastic bottom trim.
In coated PVC height 98 mm, varnished in decorative Cherry with plastic bottom trim.
In Cherry veneered PVC; 148 mm high, with plastic bottom trim.
In Steel, height 260 mm, with plastic bottom trim (for base units h. 62.4 cm)

Cornice-shelf

Wooden particle board panel, 30 mm thick, with low formaldehyde content (class E1), covered with Cherry polymeric laminate or lacquered in various colours.

Shelves (Depth 17 cm)

Fibreboard (Medium Density) 30 mm thick, with low formaldehyde content (class E1), covered with Cherry polymeric laminate.

Shelves

Wooden particle board panel, th. 30 mm thick and d.33.5 cm, with low formaldehyde content (class E1), covered with Cherry polymeric laminate or lightweight wooden particle board panel th. 60 mm and d.34 cm,  lacquered in various colours  and finishes.

Extra-thick side panels

Wooden particle board panel with low formaldehyde content, 39 mm thick, covered with Cherry polymeric laminate.

Midway unit with drawer

Front in solid Cherry, back panel and sides in Cherry veneered multi-layered wood.

Wall cladding with shelves and hooks

Frame in solid Cherry and Cherry veneered central panel in wooden particle board panel with low formaldehyde content (class E1).

Components for units

Baskets for units

In chrome-finish metal wire.

Hinges

In Steel with galvanised Copper and Nickel finish.

Plate-racks

Aluminium and PVC frame with Stainless Steel racks.

Wall unit mounting brackets

Plastic frame, adjustable hook in zinc-plated Steel and nickel-plated Steel cover.

Feet

In hard-wearing plastic; height of feet can be adjusted.

Sink bottoms

In embossed Aluminium.

Handles

Handle in die-cast metal with satined Nickel finish and protective transparent varnishing, Code 18501
Bridge handle in die-cast metal with satined Nickel finish and protective transparent varnishing, central part in methacrylate,  Code 18502
Handle in metallic Grey painted die-cast metal, Code 18503
Handle in metallic Grey painted die-cast metal, Code 18504
Handle in satin-finish stainless Steel, Code  18505
Handle in gloss chromium-plated metal, Code 16010
Handle in gloss Brass finish die-cast metal,  Code 16011
Handle in die-cast metal with satined Nickel finish and protective transparent varnishing, Code 19401
Handle in satined Nickel finish metal, Code 19402
Inset handle in satined Nickel finish metal Code 20102
Aluminiun inset handle Code 22003
Handle in satin-finish stainless Steel, variable length, Code  22011
Handle in satined Nickel finish metal, Code 27201
Handle in painted metal, colour Aluminium Grey SCAV346, Code 27202
Handle in satined Nickel finish metal alloy, Code 19403
Handle in satined Nickel finish metal alloy, Code 19404
Square handle in satined Nickel finish die-cast metal, Code 19405
Carol Flat Line:
Metal alloy inset handle with chromium-plated finish, Code  29301
For drawers and baskets:
Square inset chromium-plated metal alloy knob with push-pull opening system, Code 29303