Unit
CARCASE
In 18 mm thick waterproof (see footnote) particle board panels with low formaldehyde content (class E1), covered on both sides with mat melamine finish, with 1 mm thick ABS front edge, 0.3 mm thick laminate edging on the other sides.
SHELVES
In 18 mm thick particle board panels with low formaldehyde content (class E1), covered on both sides with mat melamine finish.
All-round laminate edging (0.3 mm thick) and 1 mm thick ABS front edge.
GLASS SHELVES
6 mm thick tempered glass slab with polished bevelled edges.
BACK PANEL
Water-based varnished fibreboard panel, colour white 3 mm thick for White and Aluminium Grey carcases, colour Cream for Dark Oak, Oak Décapé and Teak carcases.
Colour
White Carcase: side exterior White, interior White;
Grey Carcase: side exterior Aluminium Grey, interior White;
Décapé Oak Carcase: side exterior Oak Décapé melamine, interior Cream;
Dark Oak Carcase: side exterior Dark Oak melamine, interior Cream;
Teak Carcase: side exterior Teak melamine, interior Cream.
Front panels
VENEERED DOOR
In 20 mm thick water-repellent (see footnote) particle board panels with low formaldehyde content (class E1), with reconstructed Teak multi-layered wood veneer, and Dark Oak and Light Oak colour veneer.
VENEERED DOOR WITH ALUMINIUM EDGE
Water-repellent (see footnote) particle board panels with low formaldehyde content (class E1) covered with reconstructed veneer (multilayered wood on HPL - high pressure laminate - substrates) available in various colours, with 1 mm thick aluminium edging.
LAMINATE DOOR WITH ALUMINIUM EDGE
In 19 mm thick waterproof (see footnote) particle board panel with low formaldehyde content (class E1), with mat or glossy laminate coating in different colours, 1 mm thick aluminium edging.
LAMINATE DOOR WITH ABS EDGE OF THE SAME COLOUR
In 19 mm thick waterproof (see footnote) particle board panel with low formaldehyde content (class E1), with mat laminate coating in different colours, 1.5 mm thick ABS edging in the same colour as the laminate.
SMOOTH LACQUERED DOOR
19 mm thick fibre board (Medium Density) panel with low formaldehyde content (class E1), melamine finish, edges treated with polyester primer, glossy, mat or metallic lacquered, available in various colours.
RIBBED ALUMINIUM DOOR
Aluminium profile frame and bent aluminium plate central panel, steel finish.
GLASS DOORS WITH FRAME
- Steel finish Aluminum frame with integral handle and glass panel.
STEEL DOOR
Panel in 18/10 AISI 304 stainless steel with scotch brite finish, internal panel in extruded polystyrene.
GLASS FOR DOOR
Door with Steel finish Aluminium frame: 4mm thick tempered glass slab, screen-printed with opaque or semitransparent satin finish.
VARNISHING COMPONENTS
Teak, Dark Oak, Light Oak veneered doors:
- polyurethane primer and mat top-coat, outstanding resistance to light;
Lacquered doors, various colours:
Mat lacquered doors:
- water-based primer
- mat water-based top coat with embossed finish, with outstanding resistance to light;
Gloss lacquered doors:
- coloured polyurethane primer
- transparent gloss coating
- brushing on front
- gloss finish on front, outstanding resistance to light.
Metallic gloss lacquered doors:
- metallic polyurethane primer with coloured metal particles
- transparent gloss coating
- brushing of front
- gloss finish on front, outstanding resistance to light.
Drawers and baskets
DRAWERS depth 50 cm
Aluminium sides; Grey melamine bottom panel 16 mm thick; Grey painted metal back panel.
On fully pull-out galvanised metal runners, calibrated to withstand high dynamic loads (50 Kg). Drawer front vertical and horizontal position can be adjusted.
Blumotion closure system.
PULL-OUT BASKETS depth 50 cm
Aluminium sides and side rails; Grey melamine bottom panel 16 mm thick; Grey painted metal back panel.
On fully pull-out galvanised metal runners, calibrated to withstand high dynamic loads (50 Kg). Basket front vertical and horizontal position can be adjusted.
Blumotion closure system.
Pull-out baskets depth 45 cm for base unit for sink.
Accessories
PLINTH
In Aluminium, 98 or 148 mm high, with bottom trim in plastic or PVC with Teak, Foscari Oak and Dark Oak colour coating.
CORNICE-SHELF
Particle board panel, 30 mm thick, with low formaldehyde content (class E1), covered with Grey colour laminate, ABS edging, or lacquered in a range of different colours.
SHELVES
Particle board panel, 30 mm thick, with low formaldehyde content (class E1), covered with Grey colour laminate, ABS edging, or lacquered in a range of different colours.
Components for units
BASKETS FOR UNITS
In chrome-finish metal wire.
HINGES
In metal with galvanised Copper and Nickel parts.
PLATE-RACKS
Aluminium and PVC frame with Stainless Steel racks.
WALL-BRACKETS
Plastic frame, adjustable hook in galvanised metal and nickel-plated metal cover.
FEET
In hard-wearing plastic; height of feet can be adjusted.
SINK-UNIT BOTTOMS
In embossed Aluminium.
HANDLES
Square inset handle in pearly nickel painted metal
code 28301
Bridge-type handle in satin Steel finish Aluminium, fixed size,
code 22002
Bridge-type handle in satin nickel finish metal alloy,
code 28302.
Aluminium handle with variable size, set into the door on right or left side or central,
code 28303 – 28305.
Bridge-type handle in satin steel finish aluminium, “T”-section, variable size,
code 28306
Bridge-type handle in satin nickel finish metal,
code 28307
| Scavolini panel |
Max. 10% |
UNI EN 317 |
| V100 panel |
Max. 12% |
DIN 68763 |
Websolute