Unit
CarcasE
In 18 mm thick water-repellent (see footnote) particle board panels with low formaldehyde content (class E1), covered on both sides, with mat melamine finish.
1 mm thick ABS front edge; 0.3 mm thick laminate edging on the remaining sides.
SHELVES
In 18 mm thick particle board panels with low formaldehyde content (class E1), covered on both sides, with mat melamine finish. 1 mm thick ABS front edge; 0.3 mm thick laminate edging on the remaining sides.
GLASS SHELVES
6 mm thick tempered glass slab with polished bevelled edges.
BACK PANEL
Wood fibre panel 3 mm thick, water-based varnish finish.
COLOUR
Cream Ash Carcase: side exterior patined Cream Ash melamine, interior Cream
White Ash Carcase: side exterior White Ash melamine, interior Cream
Dark Oak Carcase: side exterior Dark Oak melamine, interior Cream
Red Oak Carcase: side exterior Red Oak melamine, interior Cream
Antique-effect Yellow Oak Carcase: side exterior antique-effect Yellow Oak melamine, interior Cream
Antique-effect Green Oak Carcase: side exterior antique-effect Green Oak melamine, interior Cream
Antique-effect Light blue Oak Carcase: side exterior antique-effect Light blue Oak melamine, interior Cream
Antique-effect Natural Oak Carcase: side exterior antique-effect Natural Oak melamine, interior Cream
Front panels
FRAMED DOOR
Frame in solid Oak assembled with joints, with Oak veneer, 21 mm thick.
Inner panel in MDF (class E1), with mat-varnished Oak veneer.
SLAT DOOR
In 20 mm thick water-repellent (see footnote) particle board panels with low formaldehyde content (class E1), flame-retardant (see footnote), with solid wood inserts and horizontal Oak veneer.
FRAMED DOOR WITH GLASS
- in solid Oak with mat-varnished Oak veneer.
- frame in Steel-finish Aluminium
GLASS FOR DOOR
Oak framed door: tempered, screen-printed, printed sheet glass 4 mm thick.
Steel finish Aluminium framed door: tempered, screen-printed, (also non-transparent) printed sheet glass 4 mm thick.
PLAIN LACQUERED DOOR
19 mm thick fibre board (Medium Density) panel with low formaldehyde content (class E1), melamine finish, edges treated with polyester primer, glossy, mat or metallic lacquered, available in various colours.
SLAT LACQUERED DOOR
19 mm thick fibre board (Medium Density) panel with low formaldehyde content (class E1), grooved profiles, polyester primer, gloss or mat lacquered, available in various colours.
LAMINATE DOOR WITH ALUMINIUM EDGE
Water-repellent (see footnote) particle board panels with low formaldehyde content (class E1) covered with mat or glossy laminate available in various colours, with 1 mm thick aluminium edging.
LAMINATE DOOR WITH ABS EDGE
Water-repellent (see footnote) particle board panels with low formaldehyde content (class E1) covered with mat or glossy laminate available in various colours, with 1.5 mm thick ABS edging in the same colour as the laminate
STEEL DOOR
Panel in 18/10 AISI 304 stainless steel with scotch brite finish, internal panel in extruded polystyrene.
VARNISHING COMPONENTS
Red Oak, Dark Oak, Natural Oak, White Oak, Green Oak, Light blue Oak, Yellow Oak and Cream Oak veneered doors:
- coloured varnish with acrylic primer and mat acrylic top-coat, outstanding resistance to light.
Mat lacquered doors:
- water-based primer
- mat water-based top coat with embossed finish, with outstanding resistance to light;
Gloss lacquered doors:
- coloured polyurethane primer
- transparent gloss coating
- brushing on front
- gloss finish on front, outstanding resistance to light
.
Slat mat lacquered doors:
- mat, embossed polyurethane top coat with outstanding resistance to light
Slat glossy lacquered doors:
- glossy polyurethane top coat with outstanding resistance to light.
Metallic gloss lacquered doors:
- metallic polyurethane primer with coloured metal particles
- transparent gloss coating
- brushing of front
- gloss finish on front, outstanding resistance to light.
Drawers and baskets
DRAWERS depth 50 cm
Aluminium sides; Grey melamine bottom panel 16 mm thick; Grey painted metal back panel.
On fully pull-out galvanised metal runners, calibrated to withstand high dynamic loads (50 Kg). Drawer front vertical and horizontal position can be adjusted.
Blumotion closure system.
PULL-OUT BASKETS depth 50 cm
Aluminium sides and side rails; Grey melamine bottom panel 16 mm thick; Grey painted metal back panel.
On fully pull-out galvanised metal runners, calibrated to withstand high dynamic loads (50 Kg). Basket front vertical and horizontal position can be adjusted.
Blumotion closure system.
Pull-out baskets depth 45 cm for base unit for sink.
Tables and chairs
HAPPENING TABLES
Frame: in multilayered wood with Red Oak, Dark Oak, Natural Oak, White Oak, Green Oak, Light blue Oak, Yellow Oak and Cream Oak varnished Oak veneer.
Legs: in Red Oak, Dark Oak, Natural Oak, White Oak, Green Oak, Light blue Oak, Yellow Oak and Cream Oak varnished solid Oak.
Top:
- extensible tops made from particle board panel, with low formaldehyde content (class E1), covered with laminate in a range of different colours
- fixed tops available in granite, marble, composite, decorceramica, damatop and laminate.
HAPPENING CHAIR AND STOOL
Seat and Back: in Red Oak, Dark Oak, Natural Oak, White Oak, Green Oak, Light blue Oak, Yellow Oak or Cream Oak varnished Ash.
Seat: in synthetic straw
Accessories
PLINTH:
In Aluminium 98 or 148 mm high, with bottom trim in plastic.
CORNICE-SHELF
Particle board panel, 30 mm thick, with low formaldehyde content (class E1), with Red Oak, Dark Oak, Natural Oak, White Oak, Green Oak, Light blue Oak, Yellow Oak or Cream Oak varnished Oak veneer, lacquered, or coloured laminate.
SHELVES
30 mm thick particle board panel with low formaldehyde content (class E1), with Red Oak, Dark Oak, Natural Oak, White Oak, Green Oak, Light blue Oak, Yellow Oak or Cream Oak varnished Oak veneer, lacquered, or coloured laminate.
Components for units
BASKETS FOR UNITS
In chrome-finish metal wire.
HINGES
In metal with galvanised Copper and Nickel parts.
PLATE-RACKS
Aluminium and PVC frame with Stainless Steel racks.
WALL-BRACKETS
Plastic frame, adjustable hook in zinc-plated Steel and nickel-plated metal cover.
FEET
In hard-wearing plastic; height of feet can be adjusted.
SINK-UNIT BOTTOMS
In embossed Aluminium.
HANDLES
Handle in satin-finish nickel-coated metal
fixed length,
code 22004.
Handle in satin-finish nickel-coated metal alloy, fixed length,
code 22005.
Handle in satin-finish nickel-coated metal fixed length,
code 21702.
Handle in satin-finish stainless Steel
fixed length,
code 22001.
Handle in satin-finish Steel finish aluminium, fixed length,
code 22002.
Bridge-type handle in satin-finish Steel finish
code 22006
Handle in satin-finish Steel finish aluminium, variable length,
code 22012.
Handle in satin-finish stainless Steel, variable length, code
22011
Inset perimeter handle in satin-finish Steel finish aluminium, variable length,
code 22101(for lacquered doors)/
22301(for laminate doors).
Inset handle in Grey painted aluminium and metal alloy, variable length,
code 22003.
Handle in satin-finish nickel-coated metal alloy, fixed length,
code 28302.
Notes
Please contact your Scavolini Dealer for more information about the technical, construction and functional characteristics of the various units.
“Custom” sized units
Scavolini will be happy to supply any “custom” sized units it considers feasible.
However, kindly bear in mind that:
- the very large range of standard units provides an exceptionally high degree of compositional freedom
- naturally, “custom” sized units cost more than the standard equivalents
- the delivery times for “custom” sized units may be longer than normal delivery times
- since they are one-off pieces and therefore built to specific construction requirements, “custom” sized units might not provide the same guarantees as standard units, although Scavolini will make every effort to ensure this.
| Scavolini panel |
Max.10% |
UNI EN 317 |
| V100 panel |
Max. 12% |
DIN 68763 |
Rainbow.pdf (1.730Kb)
Rainbow.zip (1.748Kb)
Websolute