Focus

Unit

CARCASE

In 18 mm thick water-repellent (see footnote) particle board panels with low formaldehyde content (class E1), covered on both sides, finished with mat melamine for Antique Natural Oak, Antique Yellow Oak, Antique Green Oak, Antique Light Blue Oak, Antique Walnut, Red Oak and White Ash carcases, Satì for the Cream Ash carcase, Grain for the Dark Oak and Grey Oak carcases and Velvet for the Kyoto Walnut carcase.
Front edge in ABS (1 mm thick) and other edges in laminate (0.3 mm thick) for Antique Natural Oak, Antique Yellow Oak, Antique Green Oak, Antique Light Blue Oak, Cream Ash, Dark Oak, Red Oak, Grey Oak and Kyoto Walnut carcases.  
All-round laminate edging (0.3 mm thick) for Antique Walnut and White Ash carcases.

SHELVES

In 18 mm thick particle board panels with low formaldehyde content (class E1), covered on both sides, with mat melamine finish. All-round laminate edging (0.3 mm thick).

GLASS SHELVES

6 mm thick tempered glass slab with polished bevelled edges.

BACK PANEL

Wood fibre panel 3 mm thick, water-based varnish finish.

CARCASE COLOUR

Antique Walnut Carcase:
side, top, and bottom panels and shelves in Antique Walnut  melamine; customised back panel colour (Cream with decoration).
White Ash Carcase:
side exterior White Ash melamine, interior Cream;
top, bottom and back panels and shelves Cream.
Kyoto Walnut Carcase:
top, bottom and side panels and shelves in Kyoto Walnut  melamine; customised back panel colour (Cream with decoration).
Cream Ash Carcase:
side exterior mat Cream Ash melamine, interior Cream; top, bottom and back panels and shelves Cream.
Antique Natural Oak Carcase:
side exterior Antique Natural Oak melamine, interior Cream; top, bottom and back panels and shelves Cream.
Antique Light Blue Oak Carcase:
side exterior Antique Light Blue Oak melamine, interior Cream; top, bottom and back panels and shelves Cream.
Antique Green Oak Carcase:
side exterior Antique Green Oak melamine, interior Cream; top, bottom and back panels and shelves Cream.
Antique Yellow Oak Carcase:
side exterior Antique Yellow Oak melamine, interior Cream; top, bottom and back panels and shelves Cream.
Dark Oak Carcase:
side exterior Dark Oak melamine, interior Cream;
top, bottom and back panels and shelves Cream.
Red Oak Carcase:
side exterior Red Oak melamine, interior Cream;
top, bottom and back panels and shelves Cream.
Grey Oak Carcase:
side panels exterior Grey Oak melamine, interior White;
top, bottom and back panels and shelves White.

ANTHRACITE GREY LACQUERED UNITS

For all units (except hood with small cabinet)
Side, top and bottom panels, shelves and back panels:
made from lightweight MDF panel (class E1), with black embossed varnish.
For the hood with small cabinet
Side, top and outside bottom panels:
made from lightweight MDF panel (class E1), with black embossed varnish.
Side, top and inside bottom panels, shelves and back panels: Cream.
Door
made from lightweight MDF panel (class E1), with black embossed varnish.
Varnishing Components
- universal polyurethane sealant
- white polyester primer.
- metallic rough-effect pigmented lacquer

Front panels

DOOR WITH FRAME AND PANEL

Frame in solid Oak with open pore mat varnish finish and central panel in MDF (class E1) veneered in Oak with open pore mat finish, maximum thickness 25 mm.

FRAMED DOOR WITH GLASS

Frame and glazing beads in solid Oak with open pore mat varnish finish, 25 mm thick.
Bronze decorated glass, 5 mm thick, with perimeter bevel.

VARNISHING COMPONENTS

Wooden doors:
Antique Walnut:
- brushed solvent stain
- solvent stain for shading effects
- polyurethane primer, two frontal coats
- sanding
- mat solvent coating for antique effects
- mat polyurethane varnish
Kyoto Walnut:
- solvent stain for shading effects
- polyurethane primer
- sanding
- mat solvent coating for antique effects
- mat polyurethane varnish
Antique Light Blue Oak:
- Blue acrylic primer, two frontal coats
- Walnut solvent stain
- sanding
- mat acrylic varnish
White Oak:
- solvent stain for shading effects
- White acrylic primer, two frontal coats
- sanding
- mat acrylic varnish
Antique Yellow Oak:
- Yellow acrylic primer, two frontal coats
- Walnut solvent stain
- sanding
- mat acrylic varnish
Dark Oak:
- solvent stain for shading effects
- acrylic primer, two frontal coats
- sanding
- mat acrylic varnish
Antique Cream Oak:
- Cream acrylic primer, two frontal coats
- Walnut solvent stain
- sanding
- mat acrylic varnish
Red Oak:
- solvent stain for shading effects
- semi-opaque Red acrylic primer
- clear acrylic primer
- sanding
- mat acrylic varnish
Antique Green Oak:
- Green acrylic primer, two frontal coats
- Walnut solvent stain
- sanding
- mat acrylic varnish
Antique Natural Oak:
- solvent coating
- acrylic primer.
- sanding
- mat acrylic varnish
Grey Oak:
- solvent stain for shading effects
- acrylic primer.
- sanding
- mat acrylic varnish

Drawers and baskets

DRAWERS depth 50 cm

Aluminium sides; Grey melamine bottom panel 16 mm thick; Grey painted metal back panel.
On fully pull-out galvanised metal runners, calibrated to withstand high dynamic loads (50 Kg). Drawer front vertical and horizontal position can be adjusted.
Blumotion closure system.

PULL-OUT BASKETS depth 50 cm

Aluminium sides and side rails; Grey melamine bottom panel 16 mm thick; Grey painted metal back panel.
On fully pull-out galvanised metal runners, calibrated to withstand high dynamic loads (50 Kg). Basket front vertical and horizontal position can be adjusted.
Blumotion closure system.
Pull-out baskets depth 45 cm for sink base units.

Accessories

PLINTH

In PVC with Oak veneer, height 98/148 mm, varnished in Antique Natural, Antique Yellow, Antique Green, Antique Lith Blue and Antique Cream Oak, Cream Ash, Red Oak, Grey Oak, Antique Walnut and Kyoto Walnut, with plastic trim at bottom.
In coated PVC, height 98/148 mm, with Dark Oak varnish on plastic trim at bottom.
In “fine ribbed" Aluminium 98 or 148 mm high, with bottom trim.

SHELVES

Particle board panel, 30 mm thick, with low formaldehyde content (class E1), with Oak veneer or Anthracite Grey lacquered

Components

BASKETS FOR UNITS

In chrome-finish metal wire.

HINGES

In Metal with galvanised Copper and Nickel coating.

PLATE-RACKS

Aluminium and PVC frame with Stainless Steel racks.

WALL-BRACKETS

Plastic frame, adjustable hook in zinc-plated Steel with nickel-plated Metal cover.

FEET

In hard-wearing plastic; height of feet can be adjusted.

SINK-UNIT BOTTOMS

In embossed Aluminium.

HANDLES

Handle in satin-finish nickel-coated zama metal alloy, fixed length, code 29001.
Handle in satin-finish nickel-coated zama metal alloy, fixed length, code 29002.

Water-repellent panels	Swelling after 24 hours	Reference standard
Scavolini panel	Max.10%	UNI EN 317
V100 panel	Max. 12%	DIN 68763